How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then the transponder is replaced and a key are required to be purchased.
It is a good idea to rotate your keys so that one does not wear out faster than the other. This will also ensure that your keys remain in top shape.
Replacement Case
The new key fobs aren't like the older Saab keys. They are equipped with electronics that make it difficult to duplicate. This has made stealing cars a lot more difficult than it was just a few years ago. It has also made it more expensive to replace keys lost.
Saab 9-3 owners must have two keys that work. It costs a fortune to replace a lost key as it requires replacing the CIM module, and changing the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are some ways around the high price. Some parts dealers will search for the code from a spare key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade at a fraction of the dealer's cost. The key, however, must be the same as the original in order to function within your car.
Follow these steps to replace the case. You'll need a flathead screwdriver as well as some patience. With the screwdriver, break apart the plastic, and then take off the emergency key. After the case is open, remove all electronics and put them back in your new case. Make sure you insert the correct badge and key back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery in just four easy steps. This guide should work with any modern-day saab key fob however the procedure might differ slightly.
The first step is to find the button that lets off the backup key within the fob. This button is usually on the back of the fob next to the Saab Logo. Then, use saab 93 key fob into the small hole inside this button. This should be sufficient to open the case to allow you to change the battery.
After the new battery CR1632 is in place You can then reassemble the remote key fob, and then program it to your car. The whole process should not take more than an hour. It's a simple procedure that doesn't require any special tools.
The procedure is a little more complicated in the event that you lose your key, but still possible. The dealer must first read the VIN of the vehicle and order an alternative TWICE module, as well as a key blade with the correct unique code. After that, they'll need to cut the replacement key and then program it with the latest software tool known as MDI.
Replacement Key Fob
The key fob is equipped with a battery that is used to lock and unlock your car. Batteries have a limited lifespan and eventually will die. This is a common problem that happens with all cars, and the good news is that you can replace the batteries on most key fobs without having to replace the whole case. Amazon sells fobs for replacement that already have all the electronics installed. You can simply open the case and replace the batteries. It is important to keep in mind that you'll need to take out the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot found in the middle of the case. The screwdriver should be moved around the case until it will split open, making it easy to remove.
When you're ready to replace your keys, ensure you have a spare since this will cut down the total cost by a substantial amount. If you have an extra key, ask the dealer to cut it in half and program it to your car. This is less expensive than purchasing a new fob.
It is possible to add another key to your vehicle even if you don't have one, however it requires an extensive amount of research and effort. A second key can cost about a few hundred dollars and it also requires programming of the car's computer. This can be accomplished by a professional, however it is an expensive option for the majority of owners.
Replacement Ignition
The new SAAB 9-3 features an advanced alarm system based on a key code. This means that in the event that you lose your only working key, acquiring another one can be very expensive because the car needs to have a computer module added and it must also be specifically designed to accept a different key. Dealers can even charge hundreds of dollars to program a new key even if they're unable to complete the task.
If you've lost the only working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and they will charge you a premium price for it. We can reprogramme the existing EEPROM inside your car's computer to make it ready to accept an additional key. This will save you more than 50% of the cost you would spend at the dealer.
If you've been a long-time owner of a 03-11 SAAB 9-3, then you likely realize that the ignition key isn't all that robust. They can be extremely sticky, and the buttons are known to fall off of them every now and then and you should think about replacing your ignition key if it isn't working as it should. Luckily, replacing the ignition key isn't as complicated as it sounds, and it can be done fairly quickly with the appropriate tools.